.

        IMA

Recycling: Covestro/Fraunofer partner to recycle aromatics from auto waste

German materials firm Covestro,Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT, and Carbon Minds GmbH have launched the Carbex research project that aims to validate a recycling process for recovering aromatics such as benzene, toluene, ethylbenzene and xylenes (BTEX) from automotive shredder residue (ASR) – a waste stream from automotive recycling that is still largely incinerated today. Covestro says it is leading the project’s industrial activities.

Recycling: Covestro/Fraunofer partner to recycle aromatics from auto waste

BTEX aromatics are essential building blocks for the chemical industry. Covestro uses benzene as a feedstock to produce MDI (methylene diphenyl diisocyanate) and toluene to produce TDI (toluene diisocyanate). MDI is used, for example, to make insulation foams for buildings and refrigerators, as well as structural and acoustic components for vehicles. TDI is used to produce flexible foams for mattresses, upholstered furniture and car seats.

At the end of a vehicle’s life, components like these, which contain significant amounts of polyurethane, can end up back in automotive shredder residue and Covestro says Carbex could help close the loop in automotive recycling.

Aromatics are mainly produced today through the steam cracking of fossil-based naphtha. In Germany alone, this process generates around 8 million tonnes/year of CO2e in direct process emissions, in addition to approximately 11 million tonnes associated with crude oil extraction and naphtha production.

At the same time, more than 466,000 tonnes/year of automotive shredder residue (ASR) are generated in Germany. Around 210,000 tonnes are used for energy recovery or disposed of. On average, polyurethane accounts for 20% of this waste stream by weight, although the share can vary significantly depending on its source.

Carbex is based on Fraunhofer UMSICHT’s patented Pyromat technology. It combines pyrolysis with a subsequent autocatalytic reforming process, in which the pyrolysis coke generated during the process itself is used as both a catalyst and an adsorbent.

At temperatures of around 500°C, components of the coke such as calcium carbonate, titanium dioxide and copper promote the formation of aromatic compounds. At the same time, they bind halogens such as chlorine and bromine, preventing them from entering the pyrolysis oil. This eliminates the need for an expensive external catalyst, which would quickly lose its effectiveness due to contaminants in real-world waste streams.

In preliminary laboratory-scale tests using automotive shredder residue (ASR), Fraunhofer UMSICHT achieved a BTEX content of 62% by weight in the pyrolysis oil – around 60% higher than in conventional pyrolysis oils – and reduced the halogen content by up to 99%. According to the institute’s calculations, process-related emissions from the Pyromat process amount to around 1.1 metric tonnes of CO2e per tonne of BTEX, almost 40% lower than the 1.6 to 1.8 tonnes associated with steam cracking.

According to market studies, widespread industrial adoption of the process could reduce CO2e in Germany by up to 640,000 tonnes/year. It would also reduce raw material-related emissions by replacing fossil-based naphtha.

Carbex covers the entire value chain, from BTEX production to its use in industrial applications. Fraunhofer UMSICHT is adapting its existing pyrolysis plant, converting a fixed-bed reactor into a moving-bed reactor and identifying stable operating conditions. The aim is to produce at least 50 kg of BTEX-rich pyrolysis oil with halogen levels below 30 ppm – the threshold for further processing in large-scale industrial plants.

Covestro is developing a model-based separation process to recover the individual aromatics benzene and toluene from the pyrolysis oil through distillation. It will then validate their suitability for use in MDI and TDI production and carry out a techno-economic assessment. As an independent partner, Carbon Minds GmbH is responsible for the ISO-compliant cradle-to-gate life cycle assessment (LCA) of the new value chain.

The potential the partners say is significant. Industry analyses show that more than 2.6 million tonnes of aromatics are produced in Germany every year, with a market value of around EUR1.95 billion. At the same time, regulatory requirements for recycling are becoming stricter. For example, the EU End-of-Life Vehicles Regulation (ELVR) will introduce mandatory recycled-content targets for plastics used in vehicles from 2032. Part of the recycled material will have to come from end-of-life vehicles. Polyurethane chemically recycled through the Carbex process could help meet these requirements.

The project (September 2026 to August 2029) is funded by the German Federal Ministry of Research, Technology and Space under its “Avoiding Climate-Relevant Process Emissions in Industry” (KlimPro-Industrie II) funding programme.


Subscribe to Get the Latest Updates from IMA  Please click here



©2026 Injection Moulding Asia. All rights reserved.